2024 John Deere E-Cut™ Hybrid Triplex Mower 2750
- Year 2024
- Make John Deere
- Model E-Cut™ Hybrid Triplex Mower
2024 John Deere E-Cut™ Hybrid Triplex Mower 2750
Triplex Mower19 hp (14.2 kW) Diesel engine w/ electronic throttle control
Electric Reel Drive
Same cut quality, regardless of operator
TechControl advanced supervisory controls
Frequency of Clip mode
Premium Contour Following
Features may include:
- Consistent cut quality, regardless of operator
- As a superintendent/greenkeeper, turf manager, equipment manager, or other supervisor responsible for golf course maintenance, there are many aspects you are judged on every single day. Some that stand out include:
- Quality of turf and overall playing conditions
- Consistency from hole to hole (or area to area)
- Golfers expect the highest level of playing conditions every time they play, and they expect hole #1 to play the same as hole #18. Over the years, those demands have increased as they continue to see picturesque tournaments on television.
- However, one of the toughest challenges in the industry today is labor. With unemployment rates at very low levels and wages increasing, it is difficult to find labor, and when you do find it, it’s often unskilled. Skilled, experienced operators can typically provide the daily quality that you are seeking. However, how do you take those new, less-skilled operators and make them perform like a 20-year veteran? For some, they may have never worked on a golf course before or may have limited general equipment operating experience.
- That’s where the 2700 and 2750 PrecisionCut™ and E-Cut™ Hybrid Triplex Mowers can to help. The key is the advanced TechControl display, which allows you to enter a multitude of operating parameters to gain more control over your operators’ performance. In addition, the TechControl display is passcode protected, meaning that operators cannot do anything to override the settings that you have programmed without having the passcode. The operator can see limited information to operate the machine, such as:
- Operating mode (park, transport, mow)
- Fuel level
- Hour meter
- Warning indicators/alarms
- No matter how many machines you have, if you set them all up the same, they will all perform the same regardless of operator.
- Increased level of supervisory control with advanced passcode-protected TechControl display
- As a turf professional responsible for your course, there’s a certain level of care you would take if you were operating a triplex mower yourself. The advanced TechControl display on the 2700 and 2750 PrecisionCut™ and E-Cut™ Hybrid Triplex Mowers allows you to build a similar level of care into how your operators are allowed to mow. It also allows newer operators to match the cut quality and consistency of veteran operators by putting you in control of key performance characteristics.
- As a trusted supervisor, the passcode-protected TechControl display allows you to control a range of operating parameters, including:
- Reel operating modes
- Frequency of clip
- Engine operating modes
- Maximum mowing speed
- Cruise control
- LoadMatch™ speed setting
- Turn speed
- Maximum transport speed
- Cleanup pass speed
- Cutting unit lift rates
- Cutting unit drop rates
- Cutting unit front-to-rear timing
Engine
Cooling
Liquid
Cylinder Liners
Three
Displacement
993 cc (60.6 cu in.)
Engine Type
3TNV74F
Engine Power
At 3600 rpm: 14.6 kW (19.6 hp)
Engine Manufacturer
Yanmar®
Air Cleaner
Semi cyclone, dry type, dual stage, 1/4 turn
Ignition
CDI | Key start and shutoff
Starter
Electric (solenoid shift)
Fuel System
Fuel Injection
Indirect
Drivetrain
Steering
Hydraulic, gear pump with double-acting steering cylinder / No-tool adjustable column and tilt wheel
Throttle
Electronically controlled / AutoPedal™ foot controls in transport / PTO rpm control through TechControl display / Three modes: Max, Eco, Min
Drive System
eHydro™ - electronically controlled hydraulic traction pump; dual pedal Reel drive | reel: Yellow two-position switch for power take-off (PTO) on right-hand CommandARM™ console
Brakes
Brake System Type
Hand lever operated, two-wheel disc brakes
Parking Brake
Mechanical hand lever to left of seat
Wheels & Tires
Tires, Front Specification
20x10-10 (smooth, smooth balloon, or turf tread)
Tires, Rear Specification
20x10-10 (smooth, smooth balloon, or turf tread)
Battery
Battery
BCI group 51 maintenance free - 12 V
Electric
Alternator
55 amp | 56 V / 100 amp
Charging System
Flywheel, alternator
Operational
Operating Conditions
Clip frequency: 14-blade: 0.54 mm/km/h (0.034 in./mph) / 11-blade: 0.69 mm/km/h (0.044 in./mph) / 7-blade: 1.08 mm/km/h (0.069 in./mph)
Operating Speed
Mowing: 0 to 9.7 km/h (0 to 6 mph) | Transport: 0 to 17.7 km/h (0 to 11 mph) | Reverse: 0 to 6.4 km/h (0 to 4 mph)
Performance
Noise Level
Max mode: 83 dBA / Eco mode: 81 dBA
Hydraulics
Hydraulic Type
Hydraulic filtration: 8 micron
Oil Filter
Full-flow filter
Dimensions
Dimensions
Quick Adjust 5 (QA5) floating, standard: 55.9 cm (22 in.) | Reel diameter: 12.7 cm (5 in.)
Ground Clearance
With catcher: 11.4 cm (4.5 in.)
Height
Of-cut: With 51 mm (2-in.) front roller: 0.079-1.42 in. (2-36 mm) / With 76.2 mm (3-in.) front roller: 0.16-1.81 in. (4-46 mm)
Turning Radius
Uncut circle: 45.7 cm (18 in.)
Width
Tread: 157.2 cm (61.9 in.) | Mowing position: 157.5 cm (62 in.)
Wheelbase
Front to rear: 130 cm (51.2 in.)
Capacities
Oil capacity
With filter: 2.2 L (2.3 U.S. qt)
Fuel Capacity
Tank: 20 L (5.3 U.S. gal.)
Features
Hydrostatic capacity (total): 20 L (5.3 U.S. gal.) / only: 16 L (4.2 U.S. gal.)
Weights
Weight
(full fluids, no operator or fuel): Standard seat, reels down: 641 kg (1410 lb)
Features
Adjustability
Bedknife: Bedknife-to-reel
Features
Muffler: Three chamber, round | Mower number: Three | Backlapping: Engagement/disengagement and rpm controlled through passcode-protected Tech Control display
Knife Quantity
Number of blades: 7, 11 or 14
Lift Mechanism
Mower: Three independent hydraulic cylinders / Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display | Reel: Right-hand joystick control for lift/lower / Three independent hydraulic cylinders / Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display