2024 John Deere Large Square Baler L341R High-Density

Information

2024 John Deere Large Square Baler L341R High-Density

Large Square Baler

Bale Documentation with John Deere Operations Center™

MegaWide™ pickup with MegaTough™ pickup teeth

John Deere moisture sensor and weighing system

BalerAssist™ drivetrain system

Features may include:

MegaWide™ pickup with MegaTough™ pickup teeth provide added durability
  • 2.2-m (7.2-ft) wide pickup is available on the L331R and L341R Baler
  • Available with standard or premium components
  • Tooth-to-tooth width is 1.92 m (76 in.)
Premium MegaWide™ pickup
  • The premium MegaWide pickup is available for the L331 and L341 Large Square Balers. The premium pickup offers larger components to increase the durability and reliability of the pickup.
  • Larger cams and cam bearings
  • Larger spider gears
Knotter trip system
  • The John Deere-designed double-tie knotting system is gear and driveline driven to ensure the needle-to-plunger timing is maintained throughout the life of the baler.
  • The needle lift crank and clutch rocker arm are made of hardened cast iron to improve strength and durability of the knotter clutch. The gearbox drives the system around 360 degrees to complete a tie.

Photos

Highlights

  • Echo Bay, Ontario
  • 2024
  • John Deere
  • Large Square Baler L341R High-Density
  • Available
  • Bale: 120 cm (46.5 in.) | Intake: 220 cm (86 in.) | Machine: 3.35 m (11 ft)
  • Bale: 90 cm (35 in.) | Machine: 3 m (9.9 ft)

Specifications

  • 2024
  • John Deere
  • Large Square Baler
  • L341R High-Density
  • Round Baler
  • Minimum: 108 kW (145 PTO hp) - no Pre-Cutter / 119 kW (160 PTO hp) - with Pre-Cutter
  • 600/50/22.5 or 710/40R/22.5
  • Pickup diameter: 25.6 cm (10 in.) | Tine spacing: 6.6 cm (2.6 in.)
  • 90x120 cm (3x4 ft)
  • Bale: 120 cm (46.5 in.) | Intake: 220 cm (86 in.) | Machine: 3.35 m (11 ft)
  • Bale: 90 cm (35 in.) | Machine: 3 m (9.9 ft)
  • 60 up to 300 cm (24 up to 118 in.)
  • Plunger: 69.5 cm (27 in.)
  • Bale chamber: 323 cm (138 in.) | Cutting: 44 mm (1.7 in.) or 88 mm (3.5 in.) | Machine: 9.29 m (30.6 ft)
  • Number of tine bars 4-5: Four | Number of plunger strokes: 45 spm | Density control: Six hydraulic cylinders | Control: ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630 | Number of knotters: Six | Knife protection: Individual spring
  • 10,755 kg (23,710 lb)
  • 21, 11, or 10