2025 John Deere Z955R EFI ZTrak™ 60-in. 7Iron™ PRO side
- Year 2025
- Make John Deere
- Model Z955R EFI ZTrak™
- Engine Model: EVO EFI
2025 John Deere Z955R EFI ZTrak™ 60-in. 7Iron™ PRO side
- 30.5-hp (22.7 kW) EFI gasoline engine
- 60-in. 7-Iron™ PRO Side-Discharge Deck, 60-in. 7-Iron™ PRO Mulch On Demand™ Deck, 72-in. FastBack™ PRO Rear-Discharge Deck
- Brake-N-Go starting
- Cross-porting hydraulic transmission
Features may include:
Powerful 30.5 hp (22.7 kW) engine has electronic fuel injection (EFI) and electronic throttle control for quick starts and superior performanceA commercial-quality, 30.5 hp (22.7 kW) gross at 3600 rpm, air-cooled engine with EFI powers the Z955M and Z955R ZTrak™ Mowers.
Engine features include:
EFI with electronic throttle control- Electronically adjusts the supply of both fuel and air, responding instantaneously when the mower transitions from light to heavy mowing.
- Unlike mechanical governors that droop under load, torque rises while maintaining constant full-throttle engine speed.
- Productivity and cut quality are improved because the mower blades keep turning at full speed, delivering optimal cut quality and dispersion of clippings.
- Immediate starting in hot or cold ambient temperatures or after long periods of seasonal storage
- No choke linkage for the user to operate
- Higher reliability with the elimination of vapor locking, misfiring, run-on, and after-bang
- Automatic altitude compensation
- Delivers fuel precisely for added efficiency
- Reduces the potential for plug fouling
- Fast starts
- Smooth operation
- More horsepower and torque per cubic inch of displacement
- Better fuel efficiency
Air-cooled for minimum maintenance and maximum reliability
Aluminum cylinder block- Effectively dissipates heat to extend engine life
- Lightweight and strong construction
- Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
- Filtered oil reduces risk of contamination for increased engine life for increased engine life
- Oil cooler helps keep engine at optimum temperature
Standard cleanout ports for easy access to remove debris collecting in cooling fins
30-amp alternatorComplies with strict Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque.
Engine serviceThe engine is easy to service, including changing the oil:
- The engine oil check and fill tube is located at the top of the engine and easy to see and reach.
- Productivity and cut quality are improved because the mower blades keep turning at full speed, delivering optimal cut quality and dispersion of clippings.
Engine
Engine Manufacturer
FX781V
Engine
Model: EVO EFI
Rated Engine Speed
Gross at 3,600 rpm
Engine Power
22.7 kW (30.5 hp)
Displacement
822 cc (50.2 cu in.)
Cylinder Liners
Two
Lubrication
Full pressure
Cooling
Forced air, with integrated clean out ports and oil cooler
Air Cleaner
Pre-cleaner / Yes / Heavy-duty canister type with safety element
Fuel System
Fuel Type
Gasoline
PTO
PTO Type
Electro-magnetic 305 Nm (225 lb-ft) | Drive: V-belt
Drivetrain
Transmission
Hydrostatic
Drive System
direction control: Twin levers
Brakes
Brake System Type
Dynamic: Twin levers | Park: Internal wet disk integrated in the transmission | Park actuation: Foot brake
Wheels & Tires
Wheels
Drive: 24x12-12 | Caster type: Flat free
Tires, Rear Specification
Caster: 13x6.5-6 | Load rating: 4 PR
Battery
Battery
12 V
Electric
Charging System
30 amp
Electrical
Cold cranking: 300 amp
Operational
Operating Speed
Blade ti: 7Iron PRO: Approximately 18,500 fpm | range: 0-19.3 km/h (0-12 mph) | Travel: range 0-19.3 km/h (0-12 mph) Forward 0-19.3 km/h (0-12 mph) Reverse 0-7.2 km/h (0-4.5 mph)
Operating Conditions
consumption: 4.9 L/hr (1.3 U.S. gal./hr)
Hydraulics
Oil Filter
Full flow, replaceable | Filter: Internal, replaceable
Dimensions
Dimensions
Mower deck size: 152-cm (60-in.) | Blades Thickness: 6.4 mm (0.25 in.)
Height
of-cut range Increments: 0.64 cm (0.25 in.) 2.54-14 cm (1-5.5 in.) | With ROPS up: 185 cm (73 in.) | With ROPS down: 119 cm (47 in.)
Cutting Width
152, 183 cm (60,72 in.)
Length
221 cm (87 in.)
Width
With chute down: 188 cm (74 in.) / Rear discharge: 192.5 cm (75.8 in.)
Capacities
Fuel Capacity
tank: 43.5 L (11.5 U.S. gal.)
Features
Crankcase With filter: 2.1 L ( 2.2 U.S. qt)
Hydraulic Capacity
5.6 L (5.9 U.S. qt)
Weights
Weight
652 to 694 kg (1437 to 1529 lb)
Features
Features
Blades Number: Three
Construction Material, Deck
7-gauge, 0.179-in. (4.6-mm) one-piece forged steel
Warranty
Warranty
36 months or 1200 hours, whichever comes first First 24 months, no hour limitation