2024 John Deere R Series Zero Turn Mowers Z994R Diesel 72 in FastBack™ PRO

2024 John Deere R Series Zero Turn Mowers Z994R Diesel 72 in FastBack™ PRO

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model R Series Zero Turn Mowers
2024 John Deere R Series Zero Turn Mowers Z994R Diesel 72 in FastBack™ PRO

2024 John Deere R Series Zero Turn Mowers Z994R Diesel 72 in FastBack™ PRO

2024 John Deere R Series Zero Turn Mowers Z994R Diesel 72 in FastBack™ PRO

  • 24.7 hp (18.4 kW) liquid-cooled diesel engine
  • ComfortGlide™ Suspension on all seat options
  • 11.5 U.S. gallon fuel tank (43.5 L)
  • 7-Iron Pro Deck
  • Rear Discharge Deck
  • Mulch On Demand™ Available

Features may include:

Powerful 24.7-hp (18.4-kW) diesel engine delivers superior performance and efficiency

The Z994R is powered by a 3-cylinder, liquid-cooled diesel engine with gross SAE J1995, PS 24.7 hp (18.4 kW) rated power at 3200 rpm that meets U.S. Environmental Protection Agency (EPA) Final Tier 4 emission standards:

  • High-torque, low-emission diesel engine for strong performance in the toughest conditions
  • Low vibration and noise levels
  • Isolated with rubber mounts for a smoother operator ride
  • Superior fuel economy
  • High torque reserve for plenty of power and performance

Key features of the engine include:

  • Economical, cast-in block cylinder design provides good cooling and long life.
  • Liquid-cooled design provides more consistent operating temperatures than air-cooled.
  • Fuel filter with replaceable element is provided.
  • Indirect fuel injection uses a pre-combustion chamber to give the engine smooth and quiet operation.
  • Full-pressure lubrication with full-flow filter lengthens engine life.
  • Engine wear reduced by ensuring proper lubrication, even when operating on hillsides or uneven terrain.
  • Oil filter helps keep oil clean for increased engine life.
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat-transfer characteristics.
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by fuel and noise from the piston slap.
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste and increase combustion efficiency.
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise.
  • Gear teeth have a ''roll-off'' profile, giving almost no clash, no noise, and no backlash.
  • Glow plugs provide quick starts in temperatures down to -18°C (0°F)
  • Key start and shutoff eliminate fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off.

Air cleaner with secondary safety element and restriction indicator

  • Dual-element, dry-type air cleaner with safety element and air service indicator
  • Dual-element design for added engine protection and easy service
  • Completely sealed for effective cleaning
  • Ninety to 95 percent of dirt ejected before it reaches the paper element
  • Air cleaner restriction indicator to let operator know when the filter needs servicing
Radiator

A sealed radiator compartment controls trash and debris. A cover is provided over the radiator, and a cooling fan area controls the flow of air.

Knobs on both ends of the cover hold it in place.

An automotive-type radiator, coolant reservoir, and electric cooling fan are provided to remove heat from the engine coolant:

  • The cooling fan is thermostatically controlled so it only runs when necessary.
  • See-through coolant recovery tank permits the operator to check the coolant level without removing the radiator cap.

A debris screen with a corrugated shape to give a large surface area covers the intake air side of the radiator to keep the radiator fins clean.

Engine

Engine Manufacturer 3TNV80F
Engine Power PS: 18.4 kW (24.7 hp)
Rated Engine Speed Gross at 3,200 rpm
Cylinder Liners Three
Displacement 1.27 L (77.3 cu in.)
Lubrication Full pressure
Cooling Liquid
Air Cleaner Pre-cleaner Yes Heavy-duty canister, dry type with safety element and air-restriction indicator
Starter Operator presence starting system: Brake-N-Go (foot)

Fuel System

Fuel Type Diesel or Biodiesel (up to B20)
Fuel System Fuel tank switch/shut-off valve

PTO

PTO Type Drive: V-belt | Electric clutch

Drivetrain

Drive System Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Zero turn
Transmission Dual hydrostatic wheel drive TuffTorq heavy-duty ground drive with cross porting for improved cooling

Brakes

Brake System Type Dynamic braking: Twin motion control levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Foot brake engagement also brings steering levers to the neutral position

Wheels & Tires

Wheels Caster wheels: 13x6.5-6 | Caster wheel: 13x5.0-6 flat free | Drive wheels: 24x12.00-12 4-ply turf
Front Wheel Anti-scalp rollers: RH, center, LH
Rear Wheel Anti-scalp rollers: Standard
Tires, Rear Specification 24x12.00-12 4-ply turf | Load rating: 4PR

Battery

Battery 12 V

Electric

Electrical Cold cranking amp: At 18 degrees C, 600 amp | Hour meter: Digital multi-function display
Charging System 75 amp

Operational

Operating Conditions Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
Operating Speed Side discharge: approximately 16,000 fpm | Blade tip speed: Approximately 17,000 fpm | Speed range: 0-18.3 km/h (0-11.4 mph) | Forward: 0-18.3 km/h (0-11.4 mph ) | Reverse: 0-7.2 km/h (0-4.5 mph)

Hydraulics

Oil Filter Full flow, replaceable, spin-on type | Drivetrain: Internal, replaceable

Dimensions

Cutting Width 152, 183 cm (60, 72 in)
Length 225 cm (88.6 in)
Width With chute down: 188, 218 cm (74, 86 in) | Rear discharge: 161.3, 192.5 cm (63.5, 75.8 in)
Height With ROPS up: 185 cm (73 in) | With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) / 2.54-14 cm (1-5.5 in)
Dimensions Mower deck size: 183-cm (72-in) | Blades Thickness: 0.64 cm (0.25 in)

Capacities

Hydraulic Capacity 5.6 L (5.9 U.S. gal)
Fuel Capacity Tank: 43.5 L (11.5 U.S. gal.)
Features Crankcase: 3.4 L (3.6 U.S. qt)

Weights

Weight 776 to 821 kg (1,711 to 1,810 lb)

Features

Construction Material, Deck 7-gauge: 4.6-mm (0.179-in.) one-piece forged steel
Features Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge

Warranty

Warranty 36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.

Product Photography