2024 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge
- Year 2024
- Make John Deere
- Model 1550 TerrainCut™
2024 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge
TerrainCut™ Front Mower7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck
Diesel Engine
Compatible with select front blade, snow blower and broom attachments
<Features may include:
- Diesel engine has high-quality features to minimize operating cost
- The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
- These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
- The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
- Key features of the engine include:
- Economical cast-in block cylinder design for good cooling and long life
- Indirect fuel injection (1550)
- Direct fuel injection (1570, 1575, 1580, 1585)
- Injects fuel directly on top of pistons for more efficient combustion
- Delivers more horsepower per gallon of fuel
- Improves starting
- Develops more horsepower per gallon of fuel and improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
- Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
- Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Enclosed engine compartment to keep out debris and lower sound levels
- Sealed radiator compartment to keep trash and debris on outside of hood
- Excellent torque for plenty of lugging power when operating in tough mowing conditions
- Full-pressure lubrication for positive lubrication, even when operating on slopes
- Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
- 90 percent to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Progressive-type air restriction indicator to let operator know when the filter needs servicing
- Automotive-type alternator for plenty of charge to the battery and power for accessories
- 75 amp for open-station models
- 95 amp for ComfortCab models
- Automatic initiation of air heater for easier cold-weather starting
- Automotive-sensing system tells operator when engine is ready to start
- Fuel tank features:
- 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
- Top draw provides clean fuel.
Engine
Engine Manufacturer
3TNV80F
Engine Power
Gross PS: 25 hp 18.4 kW
Rated Engine Speed
3,000 rpm
Cylinder Liners
Three
Displacement
77 cu in. 1.26 L
Lubrication
Full pressure
Cooling
Liquid
Air Cleaner
Dual element dry type
Starter
Electric start
Ignition
Indirect
Engine Torque
At 1,900 rpm: 47.2 lb-ft 64 Nm
Fuel System
Fuel Type
Diesel | Pump: Vacuum-operated diaphragm | Delivery system: Carburetor
Fuel System
Top draw
PTO
PTO Type
PTO off, park brake engaged, speed lever in neutral | Drive: V-belt
Drivetrain
Transmission
Hydrostatic 2WD, optional full time or on demand 4WD
Brakes
Brake System Type
Dynamic braking with hand controls, hand lever to set parking brake | Park brake: Tire engagement | Park brake actuation: Hand lever
Wheels & Tires
Wheels
Front anti-scalp rollers: Single left, double-captured center | Drive wheels: 23x10.5-12
Wheels, Caster Specifications
Flat free, 11x4-5 | No-flat semi-pneumatic with sealed bearings
Front Wheel
LH, RH, Center
Rear Wheel
LH, RH, Center
Tires, Rear Specification
26x12-12 square shoulder 4-ply turf | Load rating: 4 PR
Battery
Battery
12 V
Electric
Electrical
Cold cranking amp: 300 amp | Hour meter: Standard, digital
Operational
Operating Speed
Speed range: 0-12 mph 0-19.3 km/h | Blade tip speed: 18,000 fpm 5,486 m/min
Hydraulics
Oil Filter
Standard
Dimensions
Length
with deck: 83 in. 211 cm
Width
Deflector down - 75 in. 191 cm Deflector up for storage - 65 in. 165 cm
Height
44.8 in. 114 cm | Cutting: 1.5-4.5 in. 3.8-11.4 cm 61 in. 155 cm
Dimensions
Mower deck size: 60 or 72 in. 152 or 183 cm | Blades Thickness: 0.203 in. 0.516 cm
Capacities
Fuel Capacity
Tank: 16 U.S. gal. 60.6 L
Features
Crankcase: With filter, 2.2 U.S. qt | Cooling: 7.5 U.S. qt 7.1 L
Weights
Weight
785 lb 356 kg
Features
Construction Material, Deck
Material 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar
Warranty
Warranty
24 months