2025 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge

2025 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge

Swipe to View More

  • Year 2025
  • Make John Deere
  • Model 1550 TerrainCut™
2025 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge

2025 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge

2025 John Deere 1550 TerrainCut™ 62 in. Fastback™ rear discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck

Diesel Engine

Compatible with select front blade, snow blower and broom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:
  • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
  • Top draw provides clean fuel.

Engine

Engine Manufacturer 3TNV80F
Engine Power Gross PS: 25 hp (18.4 kW)
Rated Engine Speed 3,000 rpm
Cylinder Liners Three
Displacement 77 cu in. (1.26 L)
Engine Torque, Maximum At 1,900 rpm: 47.2 lb-ft (64 Nm)
Ignition Indirect
Cooling Liquid
Lubrication Full pressure
Air Cleaner Dual element dry type

Fuel System

Fuel Type Diesel

Drivetrain

Transmission Hydrostatic 2WD
Steering Type: Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum

Brakes

Brake System Type Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking

Wheels & Tires

Wheels Drive: 23x10.5-12
Tires, Rear Specification Steering: 2WD: 18x8.5-8 / 4WD: 18x8.5-10
Wheels, Caster Specifications Type: Flat free / Size 11x4-5

Battery

Battery 12 V
Charging System Automotive type

Electric

Alternator 75 amp

Operational

Operating Speed Travel speed - Hi forward: 0-12 mph (0-19.3 km/h) / Hi reverse: 0-5 mph (0-8 km/h) | Blade tip: 18,000 fpm (5,486 m/min)

Hydraulics

Hydraulic Type Open center | Spool valve: Front lift, standard
Hydraulic Pump 5.1 U.S. gpm (19.3 L/min)
Lift Cylinders Two

Dimensions

Length Less mower deck: 86.7 in. (220.2 cm)
Overall Width Narrow 23x10.5 tires: 51.8 in. (131.6 cm) | Wide 23x10.5 tires: 60.3 in. (153.2 cm)
Overall Height With ROPS: 82.7 in. (210 cm) | With ROPS folded: 58 in. (147 cm)
Height Cutting: 1-6 in. (2.54-15.24 cm)
Wheelbase 49.2 in. (125 cm)
Ground Clearance 6.5 in. (16.5 cm)
Cutting Width 62 in. (157 cm)
Deck Thickness 7 gauge / 0.180 in. / 4.6 mm
Dimensions Mower deck size: 60 in. (152 cm)

Capacities

Fuel Capacity 16 U.S. gal. (60.6 L)
Cooling System 7.5 U.S. qt (7.1 L)
Features Crankcase: With filter, 2.2 U.S. qt

Weights

Weight, As Shipped Net , 2WD without mower or fuel: 1,675 lb (760 kg) | Net, 4WD without mower or fuel: 1,835 lb (832 kg)

Features

Construction Material, Deck One-piece stamped: 7-Iron PRO
Features ROPS: Standard (folding) | Belt tensioning: Spring loaded

Warranty

Warranty 24 months

Product Photography