2024 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

2024 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model 1575 TerrainCut™
2024 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

2024 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

2024 John Deere 1575 TerrainCut™ 62 in. Fastback™ rear discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or FASTBACK™ Rear Discharge Deck

Diesel Engine

Integrated ComfortCab

Compatible with select front blade, snow blower and boom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:
  • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.

Engine

Engine Manufacturer 3TNV88C
Engine Power Gross PS: 37.4 hp 27.5 kW
Rated Engine Speed 3,000 rpm
Cylinder Liners Three
Displacement 100.2 cu in. 1.64 L
Cooling Liquid
Air Cleaner Dual element dry type | Air restriction indicator: Standard
Fuel Injection Direct
Engine Torque At 1,950 rpm: 80.4 lb-ft 109 Nm

Fuel System

Fuel Type Diesel (B20 compatible)

Drivetrain

Transmission Hydrostatic full time 4WD, on-demand
Drive System Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
Steering Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum

Brakes

Brake System Type Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking

Wheels & Tires

Wheels Drive: 23x10.5-12 | Steering: 18x8.5-10
Wheels, Caster Specifications Type Flat free Size 11x4-5

Battery

Battery 12 V

Electric

Alternator 95 amp
Charging System Automotive type

Operational

Operating Speed Travel speed: Hi forward: 0-8 mph 0-12 km/h | Speed range: 0-12 mph 0-19.3 km/h | Blade tip speed: 18,000 fpm 5,486 m/min

Hydraulics

Hydraulic Pump 5.1 U.S. gpm 19.3 L/min
Hydraulic Type Open center | Spool valve: Front lift, standard
Lift Cylinders Two

Dimensions

Length Less mower deck: 86.7 in. 220.2 cm
Height Cutting: 1-6 in. 2.54-15.24 cm
Overall Height with ROPS: With cab, 83.9 in. 213 cm
Overall Width With 23x10.5 tires, wide stance, 58 in. 147.3 cm
Cutting Width 62 in. 157 cm
Ground Clearance 6.5 in. 16.5 cm
Wheelbase 49.2 in. 125 cm
Deck Thickness 7 gauge 0.18 in. 4.6 mm
Dimensions Mower deck size: 60 in. 152 cm

Capacities

Fuel Capacity Tank: 16 U.S. gal. 60.6 L
Features Cooling: 10 U.S. qt 9.5 L

Weights

Weight, As Shipped Net weight, without mower or fuel, 2,436 lb 1,105 kg

Features

Construction Material, Deck One-piece stamped steel; 7-Iron PRO
Features ROPS: Factory installed ComfortCab™

Warranty

Warranty 24 months

Product Photography