2024 John Deere 1575 TerrainCut™ 72 in. Fastback™ rear discharge
- Year 2024
- Make John Deere
- Model 1575 TerrainCut™
2024 John Deere 1575 TerrainCut™ 72 in. Fastback™ rear discharge
TerrainCut™ Front Mower7-Iron™ PRO Side Discharge or FASTBACK™ Rear Discharge Deck
Diesel Engine
Integrated ComfortCab
Compatible with select front blade, snow blower and boom attachments
Features may include:
- Diesel engine has high-quality features to minimize operating cost
- The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
- These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
- The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
- Key features of the engine include:
- Economical cast-in block cylinder design for good cooling and long life
- Indirect fuel injection (1550)
- Direct fuel injection (1570, 1575, 1580, 1585)
- Injects fuel directly on top of pistons for more efficient combustion
- Delivers more horsepower per gallon of fuel
- Improves starting
- Develops more horsepower per gallon of fuel and improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
- Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
- Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Enclosed engine compartment to keep out debris and lower sound levels
- Sealed radiator compartment to keep trash and debris on outside of hood
- Excellent torque for plenty of lugging power when operating in tough mowing conditions
- Full-pressure lubrication for positive lubrication, even when operating on slopes
- Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
- 90 percent to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Progressive-type air restriction indicator to let operator know when the filter needs servicing
- Automotive-type alternator for plenty of charge to the battery and power for accessories
- 75 amp for open-station models
- 95 amp for ComfortCab models
- Automatic initiation of air heater for easier cold-weather starting
- Automotive-sensing system tells operator when engine is ready to start
- Fuel tank features:
- 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
Engine
Engine Manufacturer
3TNV88C
Engine Power
Gross PS: 37.4 hp 27.5 kW
Rated Engine Speed
3,000 rpm
Cylinder Liners
Three
Displacement
100.2 cu in. 1.64 L
Cooling
Liquid
Air Cleaner
Dual element dry type | Air restriction indicator: Standard
Fuel Injection
Direct
Engine Torque
At 1,950 rpm: 80.4 lb-ft 109 Nm
Fuel System
Fuel Type
Diesel (B20 compatible)
Drivetrain
Transmission
Hydrostatic full time 4WD, on-demand
Drive System
Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
Steering
Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
Brakes
Brake System Type
Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking
Wheels & Tires
Wheels
Drive: 23x10.5-12 | Steering: 18x8.5-10
Wheels, Caster Specifications
Type Flat free Size 11x4-5
Battery
Battery
12 V
Electric
Alternator
95 amp
Charging System
Automotive type
Operational
Operating Speed
Travel speed: Hi forward: 0-8 mph 0-12 km/h | Speed range: 0-12 mph 0-19.3 km/h | Blade tip speed: 18,000 fpm 5,486 m/min
Hydraulics
Hydraulic Pump
5.1 U.S. gpm 19.3 L/min
Hydraulic Type
Open center | Spool valve: Front lift, standard
Lift Cylinders
Two
Dimensions
Length
Less mower deck: 86.7 in. 220.2 cm
Height
Cutting: 1-6 in. 2.54-15.24 cm
Overall Height
with ROPS: With cab, 83.9 in. 213 cm
Overall Width
With 23x10.5 tires, wide stance, 58 in. 147.3 cm
Cutting Width
62 in. 157 cm
Ground Clearance
6.5 in. 16.5 cm
Wheelbase
49.2 in. 125 cm
Deck Thickness
7 gauge 0.18 in. 4.6 mm
Dimensions
Mower deck size: 72 in. 183 cm
Capacities
Fuel Capacity
Tank: 16 U.S. gal. 60.6 L
Features
Cooling: 10 U.S. qt 9.5 L
Weights
Weight, As Shipped
Net weight, without mower or fuel, 2,436 lb 1,105 kg
Features
Construction Material, Deck
One-piece stamped steel; 7-Iron PRO
Features
ROPS: Factory installed ComfortCab™
Warranty
Warranty
24 months